Ask Experts Questions for FREE Help !
Ask
    tuliphour's Avatar
    tuliphour Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2010, 03:00 PM
    What is an atwood open flame burner thermostat?
    I have e 2 thermostats... 1) AS read on front.ATWOOD OPEN FLAME BURNER... 2) Coleman... I have a Coleman furnace... what is the purpose of the ATWOOD?? I live in a park model modular... thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 19, 2010, 11:44 PM

    The atwood was for a Atwood furnace if the park model was going to use 12 volts. You are probably hooked up to 220 or 115 volts so unless the Atwood thermostat is wired to a furnace do not worry about it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Beckett model AFG burner flame-out [ 14 Answers ]

This season is the first time ever that this has happened. The furnace starts, gets a flame, runs for a while, then it flames-out. It sounds like the oil pump is still running (I hear like a spraying sound). Nothing shuts off. Then the flame will come on again, but may continue flaming-out...

Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]

I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...

Flame color on Burner Assembly? [ 1 Answers ]

What's the proper color of flame supposed to be comiing out of the burner assembly. My color is yellowish orange.

Carrier 58VUA80 Pilot flame fired but main burner doesn't come. [ 2 Answers ]

The furnace in my house (already installed in house before I bought) is a Carrier Weathermaker 58VUA80-101. Don't know if it's 9000 or what. When called for heat, (1) main blower turns; (2) Inducer motor turns; (3) Pilot flame fires; However main burner doesn't work. After many sparking it stops...

Burner flame engages on glow rod then kicks off [ 1 Answers ]

http://www.lucylou.com/ The glow rod is glowing, the flame engages across flow rod for approximately 3-4 seconds but the other four burners do no light (when I blow air on the flame it pushes the flame to the other burners & the burners stay for for a whole running cycle but will NOT engage for...

View more questions Search