Ask Experts Questions for FREE Help !
Ask
    ljk76fern's Avatar
    ljk76fern Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2010, 02:28 PM
    General 90-112 flash code chart or 6 flashes diag
    Induction fan come on 3 saconds and red flashing 6 times and lock out.

Check out some similar questions!

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

VBA Code for Creating a Chart [ 1 Answers ]

Ok, here's my problem. I have built a macro that creates a chart for me from certain columns of data. The columns are always the same ones and the data I contemplate always begins in the same row but the end data is a variable. Also, the last row always contains a Totals Row which is something...

Furnace code flashes 2 times [ 1 Answers ]

My Trane XR80 furnace is showing a flashing code of 2. The manual indicates it as external lockout. Any ideas as to what this means and how to repair it?

Still have error code on Bryant gaspac 8 flashes [ 6 Answers ]

For Northernheat Still getting code of 8 led flashes. Have checked the flame sensor not cracked or touching anything and is in the flame. The only time that it seems to happen is when the temp gets colder like 32/34 after being 38/40. The LED error code states Internal control fault ...

Trane Furnace error code = 2 flashes, what does system lockout mean? [ 1 Answers ]

I have a Trane forced air furnace which recently has had periods when it blows unheated air. When I looked at the furnace during these periods it shows 2 flashes, which according to the instruction manual is an error code which means: System lockout, retries or recycles exceeded. I don't...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.