 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gex9868jq0 Whirpool Gold with Senseon Dryer
If I set the auto cycle for heavy load, it indicates 63 min and will run until it gets to 30 min and will continue to run with the timer at 30 min. it takes a long time before it starts counting down again. The heat cycles on and off during the complete cycle. If I use other settings, the initial running time will be different and the time that the timer "freezes" will be different. I read in another sight that there was a pdf available on sensor issues, but I can not get to that pdf "http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%203978624.pdf". I would appreciate your help. Tom
|
||||
Check out some similar questions!
After aprox 5 minutes of operation, our dryer shuts off and displays an error code of "E1". You then have to reset and restart. The error code may or may not come back. It can take as long as 2 hrs to dry an average size load of laundry. L What is the fix for this annoying problem?
I have a Whirlpool senseon GEX9868jQ0 dryer that will not come on. I bought it used and initially the "Normal" and "Heavy Duty" buttons did not light and the settings did not work. All other settings worked fine for a month or so. Then it would not come on one day. At one point all the LEDs on the...
Hi Everyone, I have an electric Whirlpool Senseon dryer that's 6 years old. In the past 6 months the dryer has been taking much longer to dry. I have an appliance warranty through our local utility. I've made a call and they have dispatched one of their contract appliance repair contractors...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
