[dannac]

Whenever I need to park on an incline, I tend to use my parking brake.

It's getting to where it does not want to release by pulling the release handle as normal.

The blinking "brake" light stays on and I have to manually pull up on the foot pedal to get the light to stop blinking.

A couple of times I had to try and release more than once because I could feel the drag when trying to move.

My concern is, even though I get the blinking brake light to go off,
Or the brakes fully released.

Would appreciate advice on :
Is there a way for me to check on this myself or do I need to bring it in for repair ?

Thanks

[TxGreaseMonkey]

I'd get under the truck and slightly back off the emergency brake adjusting nut. It's likely located under the driver's side rocker panel. Lubricate the cable, if necessary.

[dannac]

Not sure what rocker panel is...

Thanks for reply

[TxGreaseMonkey]

Along the underside of the truck.

[dannac]

I've taken a picture of approx a 3' section on the underside.

Not sure which nut should be loosened.

Do not see how to lubricate cable.