Ask Experts Questions for FREE Help !
Ask
    hisue's Avatar
    hisue Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2010, 01:03 PM
    How do you remove cement based floor leveler
    Am having hardwood installed and dinette floor sags in the middle. Tried Universal mix with water leveler over chipboard and now it has to be removed since its dried. Have been using chisel and hammer but its very slow going. Any suggestions?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 18, 2010, 03:46 PM

    What is under the floor area? I'd jack the floor joist up and properly support them, as you jack the floor leveler will detach and crack
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove self leveling cement which has been put over a quarry tile floor? [ 2 Answers ]

I am removing old vinyl tiles from my bathroom floor. The tiles are coming away easily but it looks as though a selfleveling cement has been used

Henry floor leveler compound nail through [ 3 Answers ]

I am leveling up a wood subfloor to install a 1/2 inch engineered hardwood floor. I planned on using Henry leveling Compound up to 1/2 inch thick over an area about 3 feet wide by 8 feet long. This area is a transition are between a great room and a kitchen that will all be covered with the new...

Can I use floor leveler over Durock? [ 3 Answers ]

I have installed Durock in my kitchen floor, and after I glued and screwed it all down, I noticed that the floor is all on one plane, perfectly flat, except for an area that runs from one of the walls to a spot about three feet from the wall. This area slopes downward. So... Can I use a floor...

Remove old tile from cement basement floor [ 7 Answers ]

Having some trouble removing old tile from my basement floor. Is there any thing that I can do to lossen the tile up first. I have tried to scrap it and chip it but it still won't come up in some spots of the floor. HELP.

Floor Leveler [ 1 Answers ]

How do I remove excessive (dry) floor leveler?

View more questions Search