 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to set up a diaphram tank?
I have an odd set up on my farm. My well is outside my barn about 100 yards from the diaphragm tank in my house. Straight up from the well is a frost free. Currently the house and the frost free are both run from the pressure in the diaphragm tank,in the house. Is this right? I seem to lose the water completely and need to reprime the pump a lot. As far as I can tell the tank is set up correct. I have an 85g tank set to 28psi empty, 30-50 switch set at that exactly. I think the problem is, is that the entire line from the well to the house is always pressured where I would think it should have a check valve but if I install one the water will not work in the barn. Any ideas?
|
||||
Check out some similar questions!
Hello askmehelpdesker, Anyone know how to set up the background on the tank. I'm not sure if it goes on the inside or the outside. Also my heating element doesn't have numbers on the dial, so its either on or off. My budget right now is rather low or else I would have bought a better one. Also I...
When you install new expanson how do you refill it or get psi
Do I need a diaphram tank when I'm on city water now
I am confused!. I have 2 pressure tanks in series. Last week I went to check the cut in pressure. I cut off the pump and drained the tanks. The second tank in series was about 10 # low but the first tank would not register on my gauge. When I tried to put air in it, it would not take any air. ...
Hello All I purchased a new 44gallon pressure tank and attempted to install it myself. After all connections had been made to the pump and to the rest of the home I turned power on to the pump. After a while of run time I learned that the pump was not actually pumping water into the tank? I then...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
