Ask Experts Questions for FREE Help !
Ask
    matthargrove's Avatar
    matthargrove Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 17, 2010, 12:10 AM
    I'm making an adapter for my tanning bed
    I have a tanning bed that a three prong plug green ground white neutral and black hot. And I'm needing to make it a four prong plug. So I'm making the adapter so what wires do I put where to make it a four prong(dryer plug)
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Oct 17, 2010, 05:10 AM

    This sounds like a very bad idea.
    What do the instructions say about using an adapter, especially a homemade one?
    Can it be used on a 30A circuit, or must it be on a 20A?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tanning bed while pregnant? [ 6 Answers ]

I'm 9 weeks pregnant and I asked my OB if it was okay for me to lay in the tanning bed and he said that as long as my body temp stays relatively normal and doesn't get really high or anything that it won't hurt the baby. But a lot of me friends and family (most of which who are pregnant or already...

Tanning bed wiring [ 1 Answers ]

I have a tanning bed that has a 3 prong male plug - I need to wire an outlet with 20amp service - will I only need to run a 12/2 wire - using the white and black as hot??

Tanning Bed Catastrophe! [ 4 Answers ]

Ok, I just started going to the tanning bed trying to get ready for a wedding I am in in May. Apparently I am the worlds WORST tanning lotion applier because even when I think I have it rubbed in all the way, I end up with an uneven tan and blotches. So now I have big blotchy spots on my legs...

Tanning bed [ 12 Answers ]

Is it really bad? I have been getting tanned for years... I am worried now.


View more questions Search