Replacing condenser motors? Weatherking

pdentsr Posts: 1, Reputation: 1

New Member

Oct 16, 2010, 04:53 AM

Replacing condenser motors? Weatherking

Stratmando Posts: 11,188, Reputation: 508

Uber Member

Oct 16, 2010, 06:02 AM

Sure, why not?
You don't mention wiring, so they must be identical? if so turn off power, remove old, install new.

Add your answer here.

Check out some similar questions!

Replacing trane xe1000 condenser with a payne unit [ 7 Answers ]

Hi, I have a trane system the airhandler section replaced in 2007 and the trane xe1000 condenser is 9 yrs old, and seems the compressor is bad and believe it is a pump type. A contractor said he could replace the consender with a payne unit (regular type I think) and bypass the pump type and...

Weatherking furnace repairs [ 1 Answers ]

I just replaced the Heat Sensor, It fires up but will not stay on for no more than 10 seconds

Weatherking 80pj07ebr01 [ 8 Answers ]

Furnace ignitor doesn't light. Error Code on the PCB says Pressure Switch is open. How do I fix this?

Replacing condenser fan motor [ 2 Answers ]

The condenser fan motor on my "york" unit locked up. I replaced the motor but the new motor stops working after about 20 minutes. The condenser continues to work but obviously overheats because the fan is not working. The only difference between the old motor and the new one is the RPM. The new...

Replacing A/C - condenser or heat pump/condenser [ 1 Answers ]

I live in a condo. All of the units in the building need to new air conditioners because they are all old and will not survive a scheduled reroofing of the building. The association got a bid for a company that will put in a new condenser unit for anyone who wants one - it is about $1500 installed....