Ask Experts Questions for FREE Help !
Ask
    leeryleo's Avatar
    leeryleo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2010, 10:38 AM
    Heil furnaces
    I have a Heil furnace Model EP030F1981 and when I tried to turn on my furnace pre fan comes on but nothing else happened after that. The furnace does not ignite. The blower works when tested manually.
    This furnace is about 9 years old with no previous problems. Would appreciate any help or suggestions.. Thanks
    mattperez's Avatar
    mattperez Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Dec 27, 2010, 08:08 PM
    I have a heil ac/heater unit that does not turn on the heater at all any longer,I set thermostat and even raise it high to get heater to ignite,nothing happens,not even blower turns on. What should I do
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil furnaces troubleshooting [ 1 Answers ]

Heil furnace model PGF024K060A comes on fine runs to set temp kicks off heat, blower stays on but heat won't come back on until you shut down system

Heil Furnaces Manuals [ 0 Answers ]

Any tips on cleaning the coils on my 1988 gas pakadge unit?

Heil furnaces [ 1 Answers ]

I am in the planning stages of having a Heil H9mvx 95% 80,000BTU two stage variable speed furnace installed in my 1300 square foot home. Will also be installing a H4A8 two stage 16 SEER condensing unit with matching coil. Is this much oversized for the climate in SC?

Problems with ignition on Heil Furnaces [ 1 Answers ]

Having igniting problem. Just had a new gas valve(SV9500M 2682) installed, as old unit was not allowing gas flow to burners. However, now the pilot seems to fire randomly with different burner responses. I watch and see the burner in random order try to ignite all 4 tubes, but it seems like some...

View more questions Search