Remote works on three different fan combos, can the code be changed

skenderbutch Posts: 1, Reputation: 1

New Member

Oct 12, 2010, 02:44 PM

Remote works on three different fan combos, can the code be changed

Stratmando Posts: 11,188, Reputation: 508

Uber Member

Oct 12, 2010, 02:47 PM

Yes, you need to change 1 or more switches so all are different.
Each Transmitter/Receiver's codes need to match.

Add your answer here.

Check out some similar questions!

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Harbor breeze light works on remote but not fan on remote [ 3 Answers ]

The Harbor Breeze remote does not operate the fan. It only operates the light.

Tip: Hampton Bay Remote Fan - Fan works by remote, lights do not. [ 10 Answers ]

I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't [ 4 Answers ]

Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...