Light is flashing on the gas valve

rmills Posts: 1, Reputation: 1

New Member

Oct 11, 2010, 06:30 AM

Light is flashing on the gas valve

Heil furnace will come on but burners will not ignite. This has happened before about a year ago and it turned out to be the gas valve. Currently the light on the gas valve is flashing green. Does the mean that it needs to be replaced again?

Check out some similar questions!

Trane XB90 Gas Furnace -Red Flashing Light [ 6 Answers ]

My Trane XB90 Gas furnace has a red flashing led light. Is this a problem? What does it mean? Thanks in advance...

Diagnostic light flashing 3 1 on Bryant gas furnace. [ 2 Answers ]

Bryant gas furnace 14 yrs old flashing 31 on diagnostic led

Red Led Light constantly flashing on my 3Ton Payne Gas Furnace [ 0 Answers ]

Have a 3ton Payne Gas frunace... the Ignitor glows and the Gas Valve opens,the burners turn on,but after about a minute,the flame goes out and the Induced Draft motor shuts off.Only the blower stays running... the red led light keeps flashing... what is wrong? I replaced the ignitor,but the problem...

The Ok light is flashing, the Flame light is off in the furnace circuit board [ 0 Answers ]

I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...

Pilot light stays lit, but the gas valve will not open [ 1 Answers ]

I have an old Thatcher furnace model 53170. The pilot light stays lit, but the gas valve will not open to ignite the burners. I have a constant 24v across the transformer terminals. When I check the terminals at the gas valve I experience an intermitant 24v signal about every 5 minutes. I can't...

View more questions Search

Check out some similar questions!

Add your answer here.