Ask Experts Questions for FREE Help !
Ask
    ted4gas's Avatar
    ted4gas Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2010, 06:19 PM
    How can I find a price pfister plumbing part no longer made by manufacturer
    The part number is #960-010 for a flowmatic shower sleeve or as some call it a bonnet. Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 7, 2010, 06:52 PM

    Seems like the flowmatic may be alive. Price Pfister - FAQ Contact PF directly for parts
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Oct 7, 2010, 11:57 PM
    Does your faucet look like this ?
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where do I find replacement shower stems made by Price Phister (sp?)... [ 3 Answers ]

They are stripped, and broken off and I cannot find the parts.

Price Pfister [ 5 Answers ]

I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...

Price Pfister faucet [ 5 Answers ]

I have a 1 year old PF faucet (expensive) which will not remain partially open... say about 50% or less the handle closes and shuts off the water. Wide open stays open. The handle has a 'button' on the top, but it doesn't want to come loose with fairly gently prying. Please help! Jerry Triggs

Price Pfister 533 [ 2 Answers ]

I have a Price Pfister 533 with a leak. I have taken off the handle but I can't figure out what to unscrew/take off next. The Price Pfister site is down!

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

View more questions Search