 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay track lighting kit
I have installed two sets of hampton bay track lighting model hd529093 in my den. And they are controlled by 2 light swithes. I am trying to install a dimmer on them. I have lutron dimmer model fae1v500m muti-location 500w andfa603adtl for the second switch. I am not able to make lights work with dimmer. Are the track lights dimmable and if so what do I need to make it happen.
|
||||
|
||||
|
I have been unable to find the light at Home depot site, an neither of the part numbers at the Lutron site.
Can you find the instructions for each and get back here with them? I can tell you that I believe that when you have two switches, called 3- way switching, only one 3 way dimmer is usually needed. This may be the problem. Can you tell me the type of light? Incandescent, fluorescent, halogen, low voltage? Any dimmer must be rated to dim the type of light it controls. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How do I go about purchasing a new nickel-finished Hampton Bay Track lighting head. I think the model number is RKI 610543. Not available at Home Depot in other than black & white finishes.
I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...
We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.
I just install 3 8' sections of track lighting. The first section works fine. The 2nd and 3rd sections do not. They are connected by the 90' connectors and look to be fine but the lights do no work. Tried the lights that Do work on the first section also so I know it isn't the lights. Does it...
I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working.
View more questions Search
|
