 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Knockdown ceiling project gone bad?
Can you put multiple layers of knockdown to achieve the look you want? Do you have to sand between layers? Does it need to be primed before painting.
Some of the patchwork shows through the knockdown. I would like to apply a second layer of knockdown to see if it helps before I start painting the ceiling. |
||||
Check out some similar questions!
How do I skip trowel a wall? I have the California knockdown on 3 walls and I need to match them to a newly installed wall.
Last year I purchase 4 harbor breez fans with hand remotes from Lowe's. They worked fine after the install.no problem what so ever.I left for the whole summer,no one used the house while I was gone.came back home and only one remote would operate.I reset that remote to the other fan codes,in...
What is the procedure and materials used in "knockdown" interior walls?
Can anyone tell me things I need to consider when painting knockdown textured walls? The house we recently purchased has only this type of ceiling and wall finish. First of all can you do it - one article on line recommended against it. Do you use flat, eggshell, etc paint? Can you do faux...
Sorry if I am double asking... first asked this in Construction and got only one answer... any other ideas in the plumbing section? I just replaced my shower and put in slate tile on floor and walls. I tried to put in a sloped mortar floor before putting in the tile but I did not put enough...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
