My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi

Check out some similar questions!

Trane electric furnace blows 5 amp fuse [ 1 Answers ]

My trane furnace is blowing the 5 amp fuse leadig into the transformer if replaced it blows again if bypassed with wires main circuit breaker gets hot

Carrier furnace blows 3 amp fuse after burner and blower fan have been on For a while [ 0 Answers ]

Carrier furnace with 4 LED control board 3 amp fuse opens after burner and circulation fan has been on for awhile 26Vac pulls down to 8 volts ac Replaced with 5 amp fuse and it does not open and furnace operation seams normal. Valve control is a White Rodgers 36E What should the resistance of...

Bryant furnace continues to blow 3 amp fuse w/ A/C [ 1 Answers ]

I have a 10 year old bryant furnace, and recently the 3 amp fuse on the control board inside the furnace continues to blow when it is hot out and the A/C is running a lot. From what I read this is the t-stat wiring fuse, indicating a short in a wire. Not sure how this could be the case, or how I...

BRYANT Furnace blowing 3-amp fuse on control board [ 1 Answers ]

I have a Bryant M/N 383KAV036070AGJA, S/N 3097A08913, Series G furnace with central air that is blowing the 3-amp fuse on the control board. The furnace has been serviced numerous times over the past two years for various problems by multiple service companies. The control board was even replaced...

Furnace 3 amp fuse blows after install of honeywell HE360 humidifier [ 4 Answers ]

My wife's uncle installed a new honeywell HE360 humidifier and now the 3 amp fuse keeps blowing? I had a humidifier before and just installed a new onewhat could be the problem? Please help Thank you Larry

View more questions Search

Check out some similar questions!

Add your answer here.