 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier 58 PAV Control Board Flashing
Carrier 58 PAV control board flashes non-stop indicating a reverse polarity I don't know what this means and if I can fix this. The AC works but no heat. The blower comes on but no heat. Any help would be greatly appreciated.
|
||||
Check out some similar questions!
I have a high efficiency carrier furnace. When I came home yesterday I noticed that my house was a lot colder then it should be. The fan was blowing but no hot air. I checked the furnace and the LED red light was flashing - 3 quick then 1 long. On the back panel it said this indicated one of a...
I replaced Carrier/Bryant board and the led is flashing rapidly.. what can be wrong? It looked like there's problem with polarity,but everything is fine, the led is still flashing.. uff.. Led Code: Continuous on rapid flashing-Line voltage 115 polarity reversed.If twinned,refer to twinnig kit...
I installed a CESO 110057-02 board on a Bryant 373LAV product and the trouble code reads fast flashing for reversed polarity or twinning problem. Reversing the polarity had no effect. There is no twin. 24 VAC transformer replaced. Blower only comes on. Any help appreciated, Vern
Woke up this morning.. my thermostat(non-carrier) showed no digits... I asumed it was broken... replaced it with a no digital type(slider)... got no heat but cool air coming out of vents... Went downstairs to inspect furnace... got a yellow blinking led... one short... three long... Any ideas?
I would like to know how to hard wire the blower on my Carrier AC unit until I can get a new part for the blower control board? Also where can I shop for this board? Following a lighting strike, the fan stopped blowing even though the outside AC unit still ran. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
