Ask Experts Questions for FREE Help !
Ask
    cathy777's Avatar
    cathy777 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 2, 2010, 09:49 AM
    Whirlpool dryer not turning on or timer working
    My whirpool dryer stopped working today after 6 years. It won't turn on and I don't hear the timer ticking either. There is power to dryer.

Check out some similar questions!

Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working [ 2 Answers ]

I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?

Whirlpool dryer not working, but timer is [ 12 Answers ]

I have a whirlpool dryer that just stopped working. I set the timer and press start. I can hear the timer working, but the drum does not engage. If it was a bad door sensor, would that still let the timer operate? Not sure what to do. I do not have a volt meter. Any help?

Whirlpool Dryer Timer Not Working [ 3 Answers ]

When we turn on the dryer, it stops after a few minutes. Sometimes I push start and it doesn't turn on at all. Sometimes it turns on and stops after five minutes. Sometimes fifteen minutes so there is no consistency but the heat is fine. When it does turn off the timer points to zero. I will...

Whirlpool Dryer Stops turning but timer keeps going [ 5 Answers ]

Can anyone help? I have a Whirlpool dryer and it stops spinning but the timer keeps running. If you press the start button again, it will start back up. Any suggestions? Model# LER4634EQ2 approx 7 years old. Thanks!

Whirlpool gas dryer timer not working [ 1 Answers ]

My Whirlpool gas dryer is having a problem where it won't stop drying without manually shutting it off our opening the dryer door. The timer stays at the same place where it started and does not progress. The sensor timer does not work either, stays still. They dryer will literally run for hours...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.