 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I wire a hampton bay fan switch
I am trying to replace a switch on a hampton bay fan. The original switch is a 4-wire,
Black Purple Yellow Orange I know black goes to line. I tried wireing the new switch the same way as the old. The fan works but it stays on one speed for 3 chain pulls and then shuts off. Not sure if I am missing something. |
||||
Check out some similar questions!
What is the correct wire hookup for a hampton bay ceiling fan 4 wires. The new switch has 1, 2, 3 and L
I have a two (2) Hampton Bay Carousel II ceiling fans with remote. The fan on one of them stopped working and I noticed that the chain pull that controls fan speed wouldn't work. After opening the fan I noticed that the plastic switch was cracked and some of the wires were no longer connected. ...
I have a Hampton Bay ceiling fan and the light is not working ( there are 3 globes ) . I bought a "2 wire light switch" from Lowe's and was told the piece is interchangeable. I know that Home Depot sells Hampton Bay products, but Lowe's is closer. Everything seems to be hooked up correctly, but...
Hello, My Hampton Bay fan switch is broken. (At the moment, I am unable to turn my fan off without switching off the circuit breaker.) How do I take apart the fan and figure out what kind of switch I need? Thank you in advance for your suggestions. Kathy
The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected. Does...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
