Ask Experts Questions for FREE Help !
Ask
    willhunt4food's Avatar
    willhunt4food Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 1, 2010, 02:04 PM
    p0340 and p0320
    I've been dealing with this problem for a while. Rainy weather causes error codes p0340 and p0320 on my Dodge Dakota 3.9l V6. Yesterday check engine light comes on (again) but (for the first time) it would not start after I had shut it down. Next morning, starts right up and allows me a 30 mile trip home. Now it will run sometimes...
    Before computers, I would've done rotor, cap, wires and plugs. But it's 2010 so I'd like to address these sensor issues as well. One of them (the camshaft position sensor) is under the distributor cap and just below the rotor. No problem there. But where is the Crankshaft position sensor?? And is the fix as simple as dropping in the new sensor and hooking it up? Or have they managed to block out the at home repair be requiring a computer connection?

Check out some similar questions!

2000 Durango trouble code P0340 ,P0320 ,P1391 [ 8 Answers ]

I have a 2000 Durango 4.7 eng. With trouble codes - P0340 ,P0320 ,P1391. Recently the car dies while driving and when I try to restart it the RPM surges right before it dies . If I let the car set for a few moments then restart it , it will start up with a rough idle which then I place it in...

2000 Dodge Durango w/code p0320 and p0700 [ 2 Answers ]

My Dodge Durango recently has been occasionally not starting and sometimes it bucks while driving. The codes are p0320 and p0700. I looked these codes up and found the p0320 was crankshaft position sensor reference signal can not be found while the engine is cranking. And from what I've seen for...

2001 dodge durango engine code P0320 and P0700 [ 0 Answers ]

Driving down the road yesterday and felt a slight thump. Check engine light came on and noticed vehicle would hardly move and kept dying. Engine codes show P0320 and P0700. I think the thump was from the rough idle not anything breaking. I was able to drive it home and engine ran smooth if I stayed...

P0340 Error code [ 1 Answers ]

Hi, I have a 2001 Chrysler Sebring convertible with a 2.7 liter engine. The check engine light keeps coming on. A friend who manages a lube shop checked the code and what came up is P0340 Camshaft Position Sensor A-Bank 1 Circuit Manfunction. The check engine light had gone off for a few...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.