Ask Experts Questions for FREE Help !
Ask
    Dez.Kane's Avatar
    Dez.Kane Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 29, 2010, 07:51 AM
    Can we disassemble a furnace to re-level it?
    Our furnace is on an plate where the old oil furnace was and now that has broken free and the furnace is starting to "walk" away. We need to take it apart move it and pour a cement pad then move it back. Sadly we have no money and no credit left to pay a tech to do it. My husband is a Mech. Engineer and has extensive experience with high pressure pipes etc, so I think we can disconnect it safely, but have not found instructions to do this anywhere. It will be cold here soon, and we would love to get this done asap! Please help!
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 29, 2010, 08:11 AM

    What is causing the movement, vibration or what? Can you tell us more about the plate and what's under the plate, maybe even a picture?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Disassemble dell d630 [ 1 Answers ]

I need to take the back cover off the dell d630 ---I've removed all the screws, but it seems that the front will not lift off like there is another hidden screw?

Steam furnace low water level [ 1 Answers ]

After no heat In December of 2009, my steam furnace was serviced. On the first visit, the service ticket indicates the sight glass was replaced and system skimmed. The system was still not operating properly and on the second visit, a pigtail and pressure tool was replaced. Even after the...

Disassemble mixmaster [ 2 Answers ]

I have a chrome mixmaster stand mixer, unmarked for model number, voltage or current. It looks very similar to the model 2360, but has an adjustment lever for bowl position. But the big difference from other models I can find pictures of is the beater release eject mechanism. The top handle...

How do you disassemble faucet [ 1 Answers ]

Single lever kitchen faucet how do you disassemble it

High efficiency furnace noise level [ 6 Answers ]

My folks put a 95% efficient furnace in their home about 30 years ago and when it was heating, it was horribly loud--I would estimate in the 100 decibel range. We are replacing our furnace and installing a/c with it and our contractor says manufacturers have made a lot of progress over the years,...

View more questions Search