 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Roper clothes dryer
Roper clothes dryer will not start. 243v across l r poles 121v l to center, 122 v r to cntr
2 wire red white black power cord. It started once when I moved it but it does not start in any of the dry cycles when I press the start button. The door has been closed for every test. |
||||
Check out some similar questions!
Roper dryer won't start . I have 343 v left to right power connector pins L show 121v right to center and 122v left to center. It starter once when I was moving chassis to final position. It will not even start in any drying cycle it is about 1 year old. I took off back of control tower and...
I have a Roper clothes dryer about 4 years old and it needs a new heating element. We had a tech. come out and give us an est. however we cannot afford to pay 235 dollars can I replace this myself? Where do I find the element? I removed the back cover and did not see anything that looks like a...
I have a Roper clothes dryer. It has to run through 2 cycles to dry clothes. My husband and I took it apart and cleaned it thouroughly and also replaced the thermostat. It did well on the next load, but now it won't dry. What else might it be? We have checked the breaker and the voltage, all is...
I would like to know if the roper dryers have a reset button only cool air will come out what could be the problem model #rex3514rqo
My dryer is not drying my clothes. Initially, the dryer would be hot and not dry but I had moved and the vent lining was too long. That worked for awhile, but now, it takes 2-3 hours to dry the clothes. Another site said it might be a blown fuse. How do I get to the fuse box to replace it?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
