Ask Experts Questions for FREE Help !
Ask
    barrazaconcrete's Avatar
    barrazaconcrete Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2010, 03:17 PM
    0n my 2003 ford 350 4wd stocks on 4wd low I'm not able to set it back what can I do for
    On my 2003 ford 350 power stroke diesel 4wd i got stock and i set my 4wd on and i got out with no problems but when i turn my electrical 4wd switch from inside of my truck it did not change the transsmition from 4wd low to 2wd i bought the electrical swith and tested the electrical motor under the truck and it is working , the question is if between the electrical switch inside the truck and the electrical motor under the truck exists some relay or fuse, i will appreciate if somebody help me on this
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 25, 2010, 03:23 PM

    https://www.askmehelpdesk.com/cars-t...ce-482057.html
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Sep 25, 2010, 03:56 PM

    Begin by testing all under hood and under dash fuses with a test light or multimeter:

    https://www.askmehelpdesk.com/cars-t...tml#post252145
    barrazaconcrete's Avatar
    barrazaconcrete Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Sep 25, 2010, 04:02 PM
    0n my 2003 ford 350 4wd stocks on 4wd low I'm not able to set it back what can I do for
    2003 ford 350power stroke diesel 4wd problems
    barrazaconcrete's Avatar
    barrazaconcrete Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Sep 25, 2010, 04:05 PM
    I got on my 4wd low and I can not set it back, I bought the electrical switch already and tested te electrical motor under the truck and it is wirking ,I don't know what's going on
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Sep 25, 2010, 04:12 PM

    You will need to get a shop manual, perform the indicated tests, and just tear into it if needed. Sorry I can't be of more help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2003 Ford F 350 6.0 injector pump [ 3 Answers ]

I have an 03 F-350 6.0 diesel. I change my fuel filters, and drove it about 30 km and it started to sputter and finally it died. I Took my filters out and put them back in again started it up and it was running rough until it died after 3 minutes. I opened my secondary fuel filter and it was empty,...

01 z71 4wd light comes on [ 1 Answers ]

01 z71 4wd light comes on

Installing wheel sensor on 2000 4wd ford explorer [ 2 Answers ]

The location of the wheel sensors and how to install them

2003 ford e-350 turbo problems . Com [ 1 Answers ]

My 7.3 powerstroke was running and it backfired while accelaration and now it won't start . Any one familal with this ?

View more questions Search