 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1991 toyota previa engine check light kicks code 22 water temp sonsor.
I been told to rewire the harness coming from the sensor to the computer. Did that no help. I have changed the computer, no help. I think that there is a blockage in the coolant system. My temp needle spickes from time to time. Not from being too hot but from air trapped in the system and the coolant not coming in contact with the sensor. Is there a flush procedure and a bleed procedure.
|
||||
Check out some similar questions!
1991 camry 3sfe no spark no engine light where to now? Don't have a book thanks je
For a while now my previa would shake when cold. It would shake at a stop but it would run fine. The shaking would be minimized once the van ran for a few miles. So a few days ago she was running fine. So I was at a red light and she started shaking violently, threw out a lot of white smoke from...
My 1991 Accord is a great car, but recently I have a strange problem. Sometimes when I start the car, the check engine light comes on and the car runs rough, but stays running. I then turn off the ignition, and restart the car. The engine light goes out, and the engine runs perfect. This problem...
Hi, My 1991 prelude "check engine" light comes up when I start the car in very cold mornings, when I turn the car off and turn it back on after that, the light goes off. Could someone please let me know what's the problem with that? Thank you, very much!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
