Ask Experts Questions for FREE Help !
Ask
    sidewayz's Avatar
    sidewayz Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 22, 2010, 12:58 PM
    Maytag gas dryer ignites for 10 sec. then out for a min

Check out some similar questions!

My Maytag 5500aww dryer quit heating after 5 min. Any suggestions. Thanks. Mike [ 0 Answers ]

My Maytag 5500aww dryer quit heating after 5 min. Any suggestions. Thanks. Mike

Frigidaire Gallery Gas Dryer ignites, heats for about 7 minutes, then gets cold [ 0 Answers ]

I have a Frigidaire Gallery Gas Dryer that ignites, heats for about 7 minutes, then gets cold. It is model #FDGR849GHSO and has been converted to propane. If I open the door before the initial 7 minutes are up, it will not heat back up when I close the door. I checked the lint trap and the dryer...

Gas furnace ignites intermittently-ignites after removing cover from ignitor chamber [ 3 Answers ]

Unit: Carrier WeatherMaker 9200 gas furnace, with an HSI ignitor Symptom 1: Thermostat is calling for heat, as evidenced by a flame icon on thermostat face, but no action in the furnace. Symptom 2: Ignites only AFTER I initiate Action 2 below. Then it seems to work for a while, until the...

Maytag gas dryer flame on 10 sec per 1 minute. [ 2 Answers ]

I have a Maytag gas dryer, model number DG9800. When turned on the tumbler will rotate, the flame will ignite for about ten seconds, go out for a minute, then reignite. The high limit thermostat is what opens and closes the gas valve. The vent line is clear. It takes a LONG time to dry a load...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.