Ask Experts Questions for FREE Help !
Ask
    jj375's Avatar
    jj375 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2010, 09:17 AM
    Pressure test a new gas line?
    I tested my new gas line at 30 psi for one hour and also used a leak detection fluid.is this sufficient ?
    philbd's Avatar
    philbd Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Sep 22, 2010, 09:24 AM

    If you are in Canada the test must be done by a gas certified tech otherwise you can lose your insurance coverage.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Sep 22, 2010, 09:24 AM

    Yes, it is sufficient...

    We are required to pressurize gas lines to 10psi and leave it under pressure for at least 10 minutes. Inspector gives us OK to release pressure.
    jj375's Avatar
    jj375 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Sep 22, 2010, 10:47 AM
    Thanks ,gas company had no requirements and I did the work myself just wanted to double check and make sure I tested it correctly
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane/Gas Line pressure test [ 3 Answers ]

Hello, Just found this forum, thanks all for creating! I have constructed an outdoor BBQ/Kitchen and I located a 100lb propane tank approx. 50 pipe feet from the point of use. I ran 1/2" black pipe with approx. 15 fittings. I pressure tested as per a plumbers advice with 15lbs of air for 15...

Residential natural gas line pressure test [ 1 Answers ]

What would be a reasonable cost to have a residential gas system pressure tested downstream from the gas meter. There is a gas furnace, a gas water heater and a gas range on the system. The piping for residential pressure test shall stand a pressure of not less than three (3) pounds per square...

How do I pressure test a gas line [ 2 Answers ]

How do I pressure test a gas line

How do I pressure test a new gas line in home? [ 3 Answers ]

I am installing a new gas line (Black iron) for propane boiler and I would like to pressure test. What's the best way to do this... what psi and for how long?

Gas line pressure test [ 4 Answers ]

I hate to be redundant on my first question here but I'm in a bit of a delimma. I have installed a black iron propane gas system in the house I am building by myself. (Retired and needed something to do and place to live) My propane supplier guy loaned me a gauge that you screw onto the end of the...

View more questions Search