Ask Experts Questions for FREE Help !
Ask
    solvermn's Avatar
    solvermn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 15, 2010, 09:01 PM
    I am building a 32 X 48 post frame home with 8 feet between post.
    I am building a 32 X 48 post frame home with 8 feet between post. Will I have trouble if I bolt wood I beams to the post and build the floor on top of them? I want the floor 4 feet off the ground for easy access to plumming, wires etc. If this is OK will I need to have post in the middle of each joist for added support?

    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 21, 2010, 03:05 PM

    You really need to consult an architect or structural engineer for this. Do you have a permit and who will be inspecting this home, the county or city?
    dannac's Avatar
    dannac Posts: 267, Reputation: 9
    Full Member
    		  
    #3

    Sep 22, 2010, 06:58 AM
    I'd consider changing the width to something like 31'-6".
    This would allow for two 16' joist to cover span with enough overlap at center.

    If you go the full 32' width, it would take a 16' and a 18' joist to cover span.

    ... and check with local codes.

    See attached PDF file.
    Attached Images
  1. File Type: pdf post.PDF (9.1 KB, 160 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

To post a invoice for appraisal on building, post as a prepaid or expense [ 4 Answers ]

Would you post an appraisal for land and building as a prepaid or just expense?

Adjustable Post Feet [ 6 Answers ]

I need to put in concrete bases under my porch posts so the posts are above ground. Is there an adjustable metal foot for this purpose? I don't want to replace the posts, just cut them off and anchor to the conrete bases. Thanks,

Building a Square Frame [ 2 Answers ]

I know this may sound like a silly question but I am in need of some help. I want to build a square frame out of 4 x4 x12's . I want the inside dimensions to be frame to be 12 feet square... How do I arrange these so that the inside is 12 feet. Any help would be appreciated. GeeHowdy

View more questions Search