Ask Experts Questions for FREE Help !
Ask
    leebrooks's Avatar
    leebrooks Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2010, 06:45 PM
    Ceiling fan repair
    My fan stopped working in "up" mode and will only blow downward. Could this be the switch and can it be replaced?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 19, 2010, 06:56 PM

    Yes it could be the reversing switch and yes it can be replaced. Uusually found on the side of the motor housing a small slide switch. Could be a small button on a remote, do you have this type of remote? Brand aand model may help me find you an OEM part
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan repair [ 1 Answers ]

Blade mounts attach to a rubber mount. The rubber mount is broken. Does the mount Attach to the base of the motor or is it one piece?

Ceiling fan repair [ 19 Answers ]

3-speed fan suddenly would only run on high speed - replaced switch - no change; replaced capacitor (identical spec), no it runs only on low speed with new switch and new capacitor, but again only on high speed with old switch and new capacitor. I am stumped - please help!

Ceiling fan repair [ 1 Answers ]

Hamptonbay ceiling fan-- fan pull broke can that be replaced with a toggle switch or you need replacement part-- does home depot have these

Ceiling fan repair [ 4 Answers ]

Need to replace the 3 speed fan switch in a Hampton Bay fan. The new switch has L,1,2,3 holes on it. My wire colors are black, brown, gray, purple. Which goes where? Thanks!

Ceiling fan repair [ 1 Answers ]

How to repair a ceiling fan .it hums so it has power ,will not spin .What next?

View more questions Search