 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring Minka Aire Gyro
Replacing fan under warranty same fan same controls. Remote is hard wired, two black wires labeled "to fan" "to power" from receptacle power wire, red wire and ground no line wire on original hookup. Hooked power wire to power and hooked to fan to red wire. At fan power wire(black) line wire(white) and red wire which proves to be from remote "to fan" It is hot running through hard wired remote. The sending unit has one black, one white and ground. This fan will not function without remote. Wired hot all works gyro, two fans and light. The schematic and installation instruction says "wire in series" I've got two hot wires at fan. One from remote switch red wire "to fan"and one from circuit. Unfortunately we did not watch our uninstall. Please help!
|
||||
Check out some similar questions!
Please help - I'm beside myself on this one having spent pretty much all day with no luck! I apologize this is long but I guess for someone to help I need to be specific. I'm replacing a Hunter fan with a Minka Aire Cobra. The Hunter fan was wired to a single flip wall switch that basically...
I am replacing an old fan with a Minka Aire Artemis with a wall mount receiver. In the wall, I have a Black and Red wire. The Wall mount receiver has two black wires that state not to connect to white. The receiver controls the fan and light. The old switch controlled only the light on the old...
I have a Minka Aire Gyro ceiling fan installed, and last night the fans stopped working (I heard a ping noice and then they stopped rotating). The fan is set up with two fans attached across from each other by two arms, and that also rotates (which is still working). Does anyone have a...
Wiring the fan 12/2 w ground Black to Black and White to White this is correct?? Now the fan has a blue and I don't know what to do with it... only using one switch can you help me?
My question relates to a minka aire ceiling fan that I just installed to replace another ceiling fan. The old fan had two switches on the wall that controlled the light and the fan. The new fan came with a transmitter switch that is supposed to control the fan and light. I removed the old...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
