Trane TUD XL 80 furnace buner flame kicks out after 3 seconds

Check out some similar questions!

Beckett burner starts has flame for about 15 seconds off for 12 then flame on & runs [ 7 Answers ]

I have replaced the following with the problem still happening: replaced the primary control(R8184G 4009), cad cell--the oil unit was service at the beginning of the heating season. Ran like a champ. Now for the past two weeks with new parts the problem is: Oil burner starts with a flame for...

Gas Trane furnace clicks and lights blue flame, but no heat [ 2 Answers ]

My not-very-new Trane gas furnace has been struggling intermittently for many months. It's only gotten really bad about 3 or 4 times. Here's what it does: - Quiet clicks I can hear when standing next to it, about 2 per second - Loud clunking noises about once every 5 or 6 seconds, I can...

Furnace Ignitor and Flame Sensor for Trane [ 8 Answers ]

An HVAC service provider says I need a new ignitor and flame sensor at $153 and $107 respectively. Is there a cheaper way? Also, he says that my 13 year old furnace has only another year, maybe. Does this sound right? I am a widow and I am wondering if he is trying to scam me.

Furnace kicks in for 5 seconds- shuts off [ 1 Answers ]

My furnace kicks in and shuts off within seconds. Sometimes it does this several time in a row. Sometimes runs perfectly normal. Thermostat fluctuates by 3 degrees as I'm standing there looking at it. Any ideas?

Outside Blower kicks on for 5 seconds then goes off for 10 seconds [ 1 Answers ]

I've looked all over this forum for something like this, but nothing I've see quite nails my problem so If I missed it, sorry. Here it goes... My outside blower comes on for about 5 seconds when my thermostat activates for the heat. With furnace still on the blower shuts off for 10 seconds and...

View more questions Search

Check out some similar questions!

Add your answer here.