Ask Experts Questions for FREE Help !
Ask
    dealak's Avatar
    dealak Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 18, 2010, 06:12 AM
    Drained the system to create a new air bubble and now the pump won't start.
    The pump was starting too frequently so I shut off the well power and drained the system down to create a new air bubble (in the pressure tank) and now the -230v 1/2 hp- well pump won't start. I checked and changed the starter capacitor and installed a new pressure switch. I'm not sure how to meter test the pump side of the starter box. I normally do this twice a year, Spring and Fall... no problems before this..
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 18, 2010, 09:21 AM

    Any hardware store will sell you a cheap neon tester.
    Be careful! You'll be testing with high voltage!
    Test for power coming in to the control box from from the breaker box. Get a reading? Good! Now with the contacts closed check to see if you have power to the pump motor. Let me know the results. Good luck, Tom
    dealak's Avatar
    dealak Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 18, 2010, 12:35 PM
    Oh Happy Day... turns out the breaker fell out of it's slot and got replaced one slot over... both legs still read 110v, but off the same circuit. I moved the breaker over one pew and... Glorioski! Water shoots out of the faucets.
    Turns out to be another case of 'loose nut behind the wheel' Thanks everybody, Dealak
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Sep 18, 2010, 01:39 PM

    Damm! Don'tcha just love it when a plan comes together?
    Glad you're back n business. If we can ever be of any help you know where to come, Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Are.V. Freezing tonight, drained water, added A.F, but pump sucking air.what to do? [ 2 Answers ]

Hi ! Hope someone can help. We just drained all water lines and tanks. My husband has winterized one time before about 3 years ago, and did same procedure: drained all water and lines, then He added antifreeze into water tank, turned on pump. And pump sucked it into all lines.. and out faucets,...

Air in the pump system [ 2 Answers ]

I opened my pool this past weekend. I plugged back all the screws/nuts within the filter and pump area. I also unplugged all those in the pool and replaced those nozzles except the one in the skimmer. I only realized it when I turn on the pump/filter and it seems causes some air into the system....

Bubble noise in toilets, septic tanks just drained [ 7 Answers ]

Started about 2 weeks ago, both toilets, back to back rooms, started making bubbling noises, then would not flush. Let sit water in bowl goes down, let sit even longer I could flush a couple times normal then would start backing up again. Tub and sinks and everything seem to drain fine no problem....


View more questions Search