Ask Experts Questions for FREE Help !
Ask
    TWL5098's Avatar
    TWL5098 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 17, 2010, 02:27 PM
    I want to hook up a square d single phase two wire stater, other than the L1,L2, T1,
    I am trying to hook a square d starter (1ph-2w 240v) and it says to add a wire from L2 to the coil
    And common. Could you explain please?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Sep 17, 2010, 03:22 PM

    What is the starter for?
    How are you starting and stopping it?

    Control circuits for motor starters are not something for the inexperienced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire a single phase heater with 3 phase [ 4 Answers ]

I have a single phase 238-240v air handler with 15 kw(3 - 5kw strips) of heat strips. I want to wire this with 3 ph 208 wye. Can I change the wiring to this: L1 ~~~H1~~~L2 / L3 ~~~H2~~~L1 / L2~~~H3~~~L3. Then send L1 & L2 to the 240 system fan for a single phase fan motor. This Should give me a...

How to wire single phase 208 wiring [ 1 Answers ]

I need to power up a unit requiring 230 VAC single phase. The lab power is 230/3 phase and standard 120 VAC single. What is the correct way to wire this?

Single phase vs. 3 phase power - what makes 3 phase more efficient? [ 1 Answers ]

Hi, What is it that makes 3 phase power more efficient? Suppose I need an air compressor for a printing shop and I can choose between a 7.5HP single phase and a 7.5HP 3 phase. Ignoring that the cost of the motor is a little less for 3 phase, why is the motor more efficient and how does...

Single Phase Air Conditioning Condenser Wire Gauge Specs [ 2 Answers ]

Hi, I would appreciate if someone could tell me what gauge wire I am supposed to use with a single phase motor air conditioning condenser rated at 40 amps and/or 60 amps Thank you

Can three single phase loads be driven individually by single three phase supply [ 2 Answers ]

Hi... I am new this community... You are doing great job of knowledge transfer... My question: Can three single phase loads be driven individually by single three phase supply? Please clear my doubt... :confused:

View more questions Search