 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Very little hot water
Oil fire boiler w/hot water coil. I believe that the hot water coil needs flushing or replacment. Question is... the coil has a builit in restrictor from the factory... the installer apparrently added another external flow restrictor to the cold water inlet. Is it needed?
|
||||
Check out some similar questions!
Can anyone give me a reason as to why nearly completely cold water is coming out of my hot water tap in my bathroom but when I run the hot water tap in the kitchen the water is nearly boiling. The hot water and cold water taps are separate in the bathroom, where the kitchen has a handle which...
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...
I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?
1. No hot water coming from shower even though there is hot water coming from face basin in same bathroom and throughout the house( moen plumbing) 2. when water heater valve to house is turned off the cold water and hot water from shower does not flow, yet in other faucets throughout the house...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
