Ask Experts Questions for FREE Help !
Ask
    twostroke125's Avatar
    twostroke125 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 16, 2010, 04:28 PM
    Hello quick question about the 12.5 and 14.5 single cyl Briggs motors!
    Hello quick question,is the 12.5 and 14.5 single cyl briggs that came in the MTD and murray riding mowers the same mounting bolt pattern and are the shafts the same lengths
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Sep 16, 2010, 08:18 PM

    Bolt pattern is the same
    Don't know about the shaft without specs to look up.
    Would be more concerded about diam.of shaft

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs 20hp 1 cyl Intek plus - crankcase pressure [ 1 Answers ]

Hi, I have a 2 year old craftsman lt3000 lawn tractor with a 20hp briggs 1 cylinder ohv intek plus engine. My son (of course!) was mowing a couple of weeks ago and "it just died", reportedly with no noise or warning. I got it to barely run this weekend and immediately noticed a loud popping...

Comparison between single phase motors & three phase motors [ 3 Answers ]

Why single phase motors draws more current than three phase motors

Three phasee and single phase motors [ 2 Answers ]

Iam looking for a diagram for starting a three phase motor with a single phase motor. This is for a air compressor and a diagram would help or anyone's knowledge of this would be great

Old Kohler, single cyl. 12 1/2 hp, OHV adjustment [ 1 Answers ]

I have a 17 year old Cub Cadet lawn tractor with a single cylinder, 12.5 hp, motor with ohv. I have no info on how to adjust the valves. I removed the valve cover on the very top... That's as far as I have able to go. Engine has about 15 lbs. of compression which is low. It is very hard to...


View more questions Search