Ask Experts Questions for FREE Help !
Ask
    eadler's Avatar
    eadler Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 14, 2010, 04:38 PM
    Ge cooktop model jp350 wiring an element switch
    Element 2 burner switch have 5 posts need to know what color wire goes to which post
    Posts are P, L1, L2, H1, H2
    Wires; blk, red, turq, turg/whit. Purple

Check out some similar questions!

Ge elec cooktop model jp350 [ 0 Answers ]

Element 2 burner switch have 5 posts need to know what color wire goes to which post Posts are P, L1, L2, H1, H2 Wires; blk, red, turq, turg/whit. Purple

Wiring diagram for door switch for fisher and paykel model dg60fa [ 3 Answers ]

Hello, we have a Fisher and Paykel dryer, it's model number is DG60FA (there is another number on the manual: DE60FA, not sure which number is what.) We had to get a new door switch and are not sure how to wire it correctly. Any help would be greatly appreciated!

Smooth cooktop element replacement [ 0 Answers ]

I have CFEF388RES1 Frigidaire smooth cooktop/convection range. The front right dual element needs to be replaced. How difficult..

Wiring for a Cooktop [ 2 Answers ]

I am in the process of replacing a cooktop. I have a 30 amp line under my slab and can't be replaced. Most new units are asking for 40 amp line. Can these units be run on a 30 amp line if you don't use total power on the unit? Is the maximum power 6.9 kw for the 30 amp line or can it go to 7.3...

Replace a water heater 120 element with a 220 element with proper wiring [ 4 Answers ]

Can I use a 220 heating element in a 110 water heater as long as the wiring is for 220. We had a 40 gal water heater 220 volts in a weekend cabin with one shower a complete over kill. Want to replace with a 20 gal 110 water heater but to take advantage of the 220 wiring can I just swap out the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.