Not your question?
Ask your question
View similar questions
Check out some similar questions!
New 250 volt circuit, no grounding bar in main panel
[ 4 Answers ]
Hi, I have searched for this answer but I can't find a clear answer for a rookie. I am adding a 250v/20amp circuit to my main panel for a window air conditioner. I have a newer Murray main panel that was installed by an electrician, but its an old house and all the outlets are 2 prong type. So I...
Add Equipment ground bar or remove cross-bar b/w neutrals?
[ 5 Answers ]
I have a GE main breaker load center box in a separate building. It did not come w/ an equipment ground bar. Is it OK to: 1. Remove the cross bar and ground left side neutral to box w/ supplied screw. 2. Attach supplied lug to left side bar and 1/0 ground from SER cable, then all ground...
Connecting Ground bar and neutral bar
[ 6 Answers ]
I'm wiring an additional panel into a garage. It's connected to the Meter through a switch that switches the power between the company power and a generator. The main house panel is inside the house. I understand that the neutral and ground are connected in the "main panel" only and any subpanel...
My start bar ( task bar ) is in the wrong place
[ 2 Answers ]
Hi I was playing on my PC and my start bar or task bar is now up the right hand side of my screen, I don't know how I did it is there away to put it back to the bottom left (original place ) please help its annoying:mad: Thanks in advance Mike:)
Marble or Granite for a wine bar w/ stainless bar sink?
[ 1 Answers ]
Would Marble be an appropriate choice for a bar top that will have a small stainless steel undermount bar sink? I have been quoted the same price for marble or granite. Are these counter tops usually the same price? View more questions Search
|