Ask Experts Questions for FREE Help !
Ask
    flash994466's Avatar
    flash994466 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2010, 04:18 PM
    I have a heil furnace mod ntp6/tne it flashes a code 4 [limit switch]
    Bouth the blower and combustion fan run cuntinusly I bypased the thermal limit switch and bouth the lim. Switches on blower and no change am I missing something or is it a cercut bord issue

Check out some similar questions!

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

Heil furnace blowers limit switch\ blower won't cutoff [ 1 Answers ]

I have a heil furnace.it runs and heats.but when the heat turns off the blower keeps running.

Furnace code flashes 2 times [ 1 Answers ]

My Trane XR80 furnace is showing a flashing code of 2. The manual indicates it as external lockout. Any ideas as to what this means and how to repair it?

Open limit switch code [ 6 Answers ]

Furnace - Amana GUIA115A40 Control board - White-Rodgers 50A50-298 My furnace just has the fans running non-stop and the control board is flashing an open limit switch error code. The furnace is getting good circulation and both fans seems to run fine. I cut power to it all night, in the...

Open limit switch code on goodman furnace [ 1 Answers ]

I have a goodman furnace with an open limit switch code /blinking lite. Blower runs,but no flame what can I do to fix this problem?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.