Ask Experts Questions for FREE Help !
Ask
    peckaway's Avatar
    peckaway Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 6, 2010, 11:07 AM
    Brigs and stratton 3hp. Plastic carb. How do I remove spring and ball bearing,
    Has the plastic carb. How do I remove the fuel inlet. The plastic cap, spring and ball bearing? Surges, cleaned and blew out carb.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Sep 6, 2010, 06:36 PM

    Did you replace the diaphragm between the tank and carb,
    peckaway's Avatar
    peckaway Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Sep 6, 2010, 07:10 PM
    Holiday today. Plan on picking one up tomorrow. I had same thought. But was just wanting to remove and clean while I had it apart.
    peckaway's Avatar
    peckaway Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Sep 6, 2010, 07:11 PM
    Comment on DG's post
    Plan on picking one up tomorrow. Just wanted to clean it while I had it apart. Thanks
    peckaway's Avatar
    peckaway Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Sep 7, 2010, 07:08 AM
    Comment on DG's post
    Running GREAT. Put diaphram in.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to get to the carb on 19 hp brigs lawn mower [ 2 Answers ]

How do you get to the carb on a 19 hp brigs stratton rider mower. It is missing and blowing black smoke.

14.5 Brigs and stratton rider mower, ring gear/timing? [ 3 Answers ]

I changed the ring gear on this older riding mower, put back on, only one way, with new key, only one way, and now it will not fire. It did once, started, and was so loud had to shut dowm immeadiatley. What did I do wrong? It s not worth a lot of money and none now, but cannot afford a new one, if...

Brigs and stratton 12.5hp ride on mower, overfill oil [ 3 Answers ]

Brigs and stratton 12.5hp ride on mower, overfill oil ran well then died and now won't start or runs wrought do I need to strip down the cab and change the oil no smell of petrol in the oil that I can detect please can you help

Brigs 16hrs is blowing oil up into the carb [ 2 Answers ]

I need some wisdom . My 16 hrs briggs is blowing oil up into the breather . Help

Brigs and stratton vanguard engine 18 hp [ 1 Answers ]

My engine froze up, ran out for oil.got it Running again but it stopped abruptly.now it will not start .it turns over easily.pulled the plug and there is no compressicon.you would think that if ibroke sonthing in the engine,it wouldn't turn over. Any ideas. ...

View more questions Search