Ask Experts Questions for FREE Help !
Ask
    vimal12's Avatar
    vimal12 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2010, 02:36 PM
    I have yard machine gas edger and it dies after running few seconds.
    I have changed spark plug. Changed out air filter and put in new gas.

Check out some similar questions!

Briggs & Stratton dies in few seconds [ 5 Answers ]

I've got mower with Briggs & Stratton 5.0 hp engine Throttle free design model 11A602 type 0125E1. I prime and start my engine. It runs for few seconds and then it dies. I can keep it running only by continuous priming. Is it any other way I can keep it running?

Mtd yard machine dies when reverse gear is engaged. [ 1 Answers ]

Seat switch change reverse safety changed clutch safety changed Tractor goes forward budies when I put it in reverse. Where is this PTO switch on this model?

Car runs for 3 seconds and dies [ 1 Answers ]

I've been working on a 89 cavalier with a 2.8 . It runs for about 2-3 seconds then dies I've replaced several things to do with the fuel system with no luck fixing the problem . I also replaced the engine control computer .

MTD Yard Machine dies when brake is released [ 1 Answers ]

I have a 42" 17hp twin IC automatic MTD Yard Machine bought in 2000 that has me scratching my head. I was cutting the lawn when I hit a high spot ( small mound of dirt ) and the blades caught it. The mover bogged down and died before I could disengage the PTO lever. I disengage the lever, restarted...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.