Ask Experts Questions for FREE Help !
Ask
    epenn's Avatar
    epenn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2010, 11:18 AM
    I need to replace brive belt on auto tran. Troy built pony. Need diagram or instr.
    I need to replace the transmission drive belt on a troy built pony, automatic transmission. I need instructions or diagrams of belt routing if possible.

Check out some similar questions!

How to replace mower deck belt on Troy built [ 0 Answers ]

Had to take off mower deck belt on Troy Build 42" lawn tractor. Put it back on and blades won't engage. When I pull up switch I hear a hum and that's it.

Troy built, "pony", drive belt replacement [ 2 Answers ]

To better access the drive belts, can the mower be tilted "front up" 'back down" on the ground? Will fuel and oil leak? Any other pointers?

Troy Built Pony problems [ 1 Answers ]

I have an '07 troy built pony. It keeps burning the belts off. Seems to slip only when the pto is not engaged. There is no tension on the belt. The smoke is coming from the crank pulley.

Troy built pony tractor smoking [ 3 Answers ]

I have a troy built pony tractor about 2.5 years old, been used very little,yesterday while mowing it started blowing a tremendous amount of smoke from the exhaust while the blades were engaged I disengaged the blades and the smoke stopped, but if you engage the blades it smokes badly and the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.