Ask Experts Questions for FREE Help !
Ask
    gggtttt's Avatar
    gggtttt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 1, 2010, 07:08 AM
    Reversing Valve on Goodman Heat Pump... why does it keep breaking?
    Had a 5 ton Goodman Heat Pump installed in 2008. Since that time, the HVAC service company has had to replace the reversing valve 4..?. I think 5 times, I've lost count. Thankfully, I have a service contract! Some folks post that it's all about the quality of the installation. O.K... if that's the case, what did my Goodman Certified HVAC professional not do correctly?? Three(3) weeks ago, he had to change out (replace) the capacitor. Four (4) months after it was install in 2008, a contactor had to be replaced. What's going on with this Goodman product?? Help!

Check out some similar questions!

Goodman heat pump does not switch on for heat and the AC blows A/H fuses. [ 4 Answers ]

My Goodman heat pump, model GSH130361AD, heat does not switch on (outer unit). When it first went out, the Honeywell T8411R t-stat digital display went blank. First, I tried replacing the stat with other, but they only accommodated 5 wires. Wiring to the Honeywell was 7 wires. I'll come back to...

My Goodman heat pump, model GSH130361AD, in heat mode outside unit does not start up. [ 10 Answers ]

Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...

2008 4 ton Goodman heat pump doesn't switch into electric strip heat? [ 18 Answers ]

OK even when its 17*F out I can still here it running at night. So is this a problem? I mean it runs non stop.

Goodman cpl t30-1a heat pump, heat not working/no compressor or fan operation [ 5 Answers ]

The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.

Train,heat pump, reversing valve [ 1 Answers ]

I have a Trane heat pump. The reversing valve is stuck in the heat cycle. What can I do to make it switch into the cool cycle? Condenser (outside unit is charged,. 150pii high and cver 200 on the low side... seems like it is stuck also. When unit starts the low side becomes hot and the high side...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.