Ask Experts Questions for FREE Help !
Ask
    billyb15's Avatar
    billyb15 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2010, 09:58 PM
    6hp briggs makes cliaking nois while running,with a slight backfire through carb
    I have a Snapper lawn mower with a 6HP Briggs Stratton engine, it makes aclacking noise while running with a slight miss and back fire through the carb. The flywheel key and mag. Gap are OK
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Aug 30, 2010, 08:21 PM

    Check your valves , check your fuel make sure there's no water in it.Try putting a little sea foam fuel addictive in your fuel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs and stratton carb? [ 9 Answers ]

Got a murray push mower w/3.5 hp classic 9d902 2005 b2 00122851 b&s motor--primer bulb rotted away-installed new snap in bulb--opened up carb checked out for any gummy build up or bulb fragements -found none----primer won't squirt gas in carb unless you pour a little gas in carb--starts great then...

Backfire through the carb 17.5hp kohler [ 3 Answers ]

Hello, I have a 17.5 hp kohler cv491s on a 2004 deere riding mower. At 40 hours the engine through a rod. I disassembled the engine, the crank was okay so I polished up a little. I replaced the broken connecting rod and reassembled. I am 99% sure of the timing mark alignments on the small gear and...

Briggs & stratton 6hp engine [ 1 Answers ]

What is the proper valve setting and how are they to be adjusted?

View more questions Search