 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
C85192-00 sears kenmore manuel
I have a kenmore dryer model 970-C85192-00 bought in 2006, the control board seams to be defect, it is mixt up, when I have finish with the dryer and stop it, it start again by itself and it beep beep beep all the time, I tried to unplug it for a week to reset I'm but it is still the same, help, a new board cost 314.99 + taxes
Serge |
||||
Check out some similar questions!
Hello I am looking for a manual for model # C8MPT075F14B1. The furnace is a Kenmore and was installed in 2006. The issue I have is when the furnace kicks in it sounds like a freight train. I have been told that it might be the blower fan which exhaust the gas up the flue. If so can I replace this...
I have a sears kenmore washer that all of a sudden just stopped workinmg after it filled with water. It did not start to agitate, just quit. It is about 5 years old at worst. Could it be an overload switch? Or does this machine even have such a thing. I was able to take out the timer but not sure...
My dryer seems to take a long time to dry. First where is the serial number on the dryer?
I have a Sears Kenmore dryer tumbles but no heat I replaced the Hi limit theremo and check the heating element. I am getting a ohm reading on the heating element but it does not heat up. Any help would be appreciated. Thanks MS
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
