 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Rheem furnace that is at least 10 years old, could be as old as 20. I had to replace the blower motor which was a 1/4 hp and the motor I replaced it with was able to be 1/8, 1/4 or 1/2 hp. Depending on how it is wired. From reading on the capacitor I could hook this up as a 1/2 hp which...
If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...
I have an old furnace blower that I want to convert to a shop air clearner. I want the motor to operate from a normal 110 volt switch. My question is which wires do I connect to the switch? The motor is a 1/2 hp Emerson Model K55HXLGG3702 It has 6 wires - black, white, brown, blue, red, yellow
I recently change out the fan unit on my furnace but I must have wired it wrong. The problem is in the summer I can run the A/C on auto, but the heat side only runs when the fan is switched on. Did I miss a relay wire or overlooked it all together? Trying to conserve energy. Thanks!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
