Ask Experts Questions for FREE Help !
Ask
    Onlyone's Avatar
    Onlyone Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2010, 05:56 PM
    How do I get to my lid switch on whirlpool ultimate care 2 washer do not drain
    How do I remove lid switch on whirlpool ultimate care 2 washer that do not drain after wash cycle
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 25, 2010, 06:42 PM

    With power off, you may pull off and or remove screws on side of Control assembly, check plastic ends.
    Many Washers have these weird clips, youn should see 2 in the bacl, left and right side.
    Remove 1, reinstall until you have can do it, then remove both and tilt body torwards the front.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Ultimate Care II washer will not drain [ 13 Answers ]

The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...

Whirlpool Washer won't spin or drain. Lid switch bypassed [ 1 Answers ]

Whirlpool washer Model # LSB6200KQ1 won't spin or drain. I bypassed lid switch several months ago. When it hits spin cycle, just nothing no noise, or smell.

Ultimate care whirlpool washer [ 0 Answers ]

Am not able to get hot water to come out... am only able to get cold water washing done. Any clues on this? It was working perfectly and now it isn't.

Whirlpool Ultimate Care 2 washer stalls and won't drain [ 1 Answers ]

I have a Whirlpool Ultimate Care 2 washer that will begin a cycle, but stalls before finishing and won't drain. When it stalls it goes completely silent. So currently it's sitting silently half full of water. I'm a fairly handy guy around the house, but know nothing when it comes to...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks

View more questions Search