Ask Experts Questions for FREE Help !
Ask
    Partsman41953's Avatar
    Partsman41953 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2010, 05:48 AM
    Heat coming out instead of AC. What can I do to fix this?
    I have a Carrier AC/Heat pump system, 2 zone, which uses a Weathermaker Zone Control board. The problem that I am having is that whenever the air turns on heat come out instead of cold air. I even went as far and removed the W1 and W2 wires for the heat pump and the heat still came on. Is the control box bad? If it is where would I find a box for this unit. The closest picture I could find online is for a Zonekit2 box but I cannot find anyone who stocks this part. Is there a compatible board I could use to get my unit running again?

    Thanks

Check out some similar questions!

No heat coming out of heat and air unit [ 0 Answers ]

Heat and air unit is blowing cold air and the air doesn't heat until you jack up the thermostat and I guess the auxiliary heat is kicking in

Water is leaking from my furnace -- where can it be coming from and how can I fix it? [ 1 Answers ]

I have noticed that water is leaking from my furnace. There is rust and water inside the unit when I open the top panel. I have an Air-Ease Ultra V Tech 91 unit. We cannot seem to find where the leak is coming from. Where might the leak be coming from and how can I fix it? There are two clear...

Crp coming out, Will they have to destroy My bathroom to fix it? [ 2 Answers ]

Its all related . We have to bathrooms and shower and bath. Lately we've been having a lot of troubles with the toilets. Whenever we do NUMBER 2 in one of the toilets(toilet A), the water in the other (toilet B)starts bubbling when flush toilet A. Then, the water starts rising.. close to the...

Heat pump auxiliary heat keeps coming on. [ 13 Answers ]

One of our 2 Ruud heat pump keeps cycling on auxiliary heat. The installer says there is nothing wrong, if so why is the other one working properly, plus in the summer it will not get below 76 degrees with that same unit. Freon is fine.

No heat. How to fix it? [ 1 Answers ]

We have a Beckett Burner Model AFG50XN with a Honeywell R8184M1002 primary oil igniter. Its about 5 years maybe. The oil coming in isn't being lit. We have hit the reset button on the honeywell. That worked for a short time to get the fire going. But that method seemed to stop working. What are the...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.