Ask Experts Questions for FREE Help !
Ask
    dterriaco's Avatar
    dterriaco Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 21, 2010, 01:42 PM
    Troy bilt bronco keeps dying
    My 2004 bronco has just started to die on me after cutting about 3/4 of my half acre yard. It runs fine and then as if it has bound up it sputters and then dies. I wait a minute and it restarts and will make about one pass before it does the same thing over again.

    Here's what I done so far: new carb kit, new fuel filter, drained fuel line, new gas, oil change but the same problem persists. It acts like it's being starved of fuel. Has anyone had the same issue?
    eklein's Avatar
    eklein Posts: 1, Reputation: 1
    New Member
    		  
    #2

    May 29, 2011, 05:04 AM
    I don't have an answer for you, but I am having the same problem, and have gone through the same steps as you. Would be very interested to here from somebody with a suggestion.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    May 29, 2011, 07:38 AM

    Could be fuel cap not venting I would check this befire going much further.
    Luck
    jpdigiorgio's Avatar
    jpdigiorgio Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Aug 29, 2012, 08:51 AM
    Quote Originally Posted by eklein View Post
    I don't have an answer for you, but I am having the exact same problem, and have gone through the same steps as you. Would be very interested to here from somebody with a suggestion.
    I would be interested in any solutions on my sputtering problem
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy-Bilt Super Bronco 13AX60TG766 [ 2 Answers ]

Does anyone have a maintenance manual available for subject riding mower? Our RC club mower's drive pedal is now extremely hard to push down all the way. A helpful user on another forum suggested it may be the variable speed pulley hanging up. He offered advice on how to check this by removing...

Troy Bilt Riding MOwer (Bronco) [ 4 Answers ]

Hi, I have a troy bilt riding lawn mower (42 inches deck) bought last year. I am looking to put a bagger with chute on it. Do you know if a Craftsman bagger ( 6 Bushel 2 - Bin Hard Bagger for 42" Deck ) will fit? I know all most of the available mowers in the market are built by MTD, do the...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

Troy Bilt Bronco Weedeater [ 1 Answers ]

Problems with starting our Troy Bilt Weedeater. Less than a year old. Hard to start And once it starts, automatically shuts off as if struggling for gas. We have cleaned and changed spark plug and Changed oil mixture... Any Suggestions? Thanks, Kim & Ed

Troy Bilt Super Bronco main drive [ 1 Answers ]

I have a Troy Bilt Super Bronco 42" deck rider, It has the veri-drive I believe it is called. Yesterday while mowing I had the drive pedal engaged and the mower just stopped and it started smoking from underneath the mower and wouldn't move in forward or reverse. It will go into gear(forw. And Rev)...

View more questions Search