Ask Experts Questions for FREE Help !
Ask
    hillbillyjoe's Avatar
    hillbillyjoe Posts: 23, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2010, 11:33 AM
    1996 Honda Civic Cylinder #4 missfire
    1996 Honda Civic 1.6L I have installed new cap,rotor,coil,plugs,wires, and dielectric grease. It runs OK but it seems like its lacking power, so while the motor was running I pulled 1 plug wire at a time. When I pulled off #4 plug (closest to the distributor) nothing changed in the motors idle. When I pulled #3, #2, #1 it wants to stall out. What would cause my cylinder #4 to completely missfire?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 2, 2010, 02:17 PM

    That's a good way to over stress and ruin your new coil.
    biff26's Avatar
    biff26 Posts: 28, Reputation: 4
    New Member
    		  
    #3

    Aug 21, 2010, 10:56 AM

    Check valve adjustment
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

92 Honda Civic cylinder firing order? [ 4 Answers ]

I recently replaced the ignition coil, distributor cap, and rotor on my 92 honda civic. This fixed my initial problem of the car starting; however it seems to be running a little rough and a little gutless. So I am not sure (if when I initially was moving about and replacing things - yes I could...

1996 honda civic lx [ 3 Answers ]

Have replaced the i.c.m,coil,spark plugs,spark wires,rotor,distributor cap due to misfires in all cylinders but still #4 cylinder is not burning all its mixture.done a cylinder drop test on it and no change at all in idleing.its getting spark at both ends but when I pull the spark plug out its...

1996 honda civic lx [ 1 Answers ]

Both of my headlights went out today on my 1996 Honda Civic lx. I checked fuses and bulbs, but to no avail. Any suggestions on what it could be?

1998 Honda Civic Misfire Cylinder 2 [ 2 Answers ]

I got a 1998 honda civic that was misfireing in all cylinders. I replaced plugs , plug wires, cap, and rotary button and coil in distributor and I still have a misfire in cylinder 2. Anyone know what the problem is?

1990 honda civic ignition lock cylinder [ 2 Answers ]

Trying to change out an ignition lock cylinder on a 1990 honda civic-standard. Help me in getting it out. >Moved from Forum Help<

View more questions Search