 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
OK... I know asked 100 times before... but could someone make sense of this for me. I just about get it... then all the colors start giving me nightmares and I loose it. Here's what I have Power source Black and white wire White connects to switch plates red wire Black power source...
I have an Airmak AM207 ceiling fan. It has a 3 way switch with 4 wires. I am replacing the old switch and got the wires mixed up. What is the right order and color for L 1 2 3. The black is the line, grey goes to the reversing switch, purple and brown come out of the capacitor which is a Lung...
This desk fan has four wires the switch is bad red gray orange and black the new switch has from switchpull left to right 1L32 How do you connect email [email protected] thanks a million
The pull switch on my ceiling fan broke off and I need to replace it. The switch is a well tec 116997 and has 4 wires. The black wire attaches to the "L" and the purple attaches to the "2". There is also a grey wire and a brown wire that disconnected from the switch when a piece of the plastic...
Wire colors are: black, grey, green and brown
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
