Cut Sheets For Glaicer Bay Wall Hung Bath sinks

pvr56 Posts: 1, Reputation: 1

New Member

Aug 21, 2010, 07:09 AM

Cut Sheets for Glaicer Bay Wall Hung Bath sinks

I need Rough in drawings for a Glaicer Bay wall Hung Bath sink.

speedball1 Posts: 29,301, Reputation: 1939

Eternal Plumber

Aug 21, 2010, 07:18 AM

What. Exactly, do you wish to know? Most wall hung lavatories rough in the same way. Back to you, Tom

Add your answer here.

Check out some similar questions!

Wall Hung Sink Repair/Replace [ 6 Answers ]

I am a Landlord. I have a turn over that the bathroom sink was, sat on, leaned on, stood on. So what I have is the sink tilted down and pulled away from the wall. The caulking is hanging in mid air. To repair this? 1. I try tightening the bolts providing I can find them and there are bolts. ...

Baxi Luna HT Wall Hung.E1 message [ 1 Answers ]

Our boiler is not giving us hot water. We had a company come out twice to "repair" this in the last year and we're really hoping not to spend $500 again. I think that I have some idea... On the gauge that reads "bar," the water level is below 1. I need to know how to replenish water into the...

Wall hung basin [ 2 Answers ]

I'm fixing a wall hung basin what height should I fix it I've been told 1000mm from a friend but I want to be sure

Drywall sheets don't fit in my room, how should I cut them [ 3 Answers ]

Hi everyone I couldn't get 4x8 sheets of plywood into my third floor. I had to cut them (2X8 sheets). Does anyone have a suggestion for how to cut the 4x8 drywall sheets (2X8 or 4x4 or other) to end up with the fewest seams. The ceiling height is just less than 8' if that makes a difference. ...

Changing from a wall hung toilet to a floor mounted one. [ 2 Answers ]

My house was built in 1962 and has Case model 3000 wall hung toilets. I am remodeling one bathroom and have to change the plumbing over from wall hung to floor mount. The problem I have is that the current closet flange is mounted to a T with one side going to the sewer and the other going to the...