Ask Experts Questions for FREE Help !
Ask
    marksman52's Avatar
    marksman52 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 9, 2007, 05:11 PM
    Shower head relacement
    I need to replace my shower head and it looks like I am going to need to replace the pipe that comes out from the wall as well. I just want to know if this is something that needs to happen with the water shut off to the apartment or if I will be OK with just the faucets turned off? Also do I need to solder these pipes together?

    Thanks,

    Marksman52
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #2

    Jan 9, 2007, 09:49 PM
    You should be able to replace the head and the chrome arm without turning off the water other than the valves on the faucet. The chrome "dogleg" looking pipe is just screwed into a fitting in the wall, unscrew it by turning it counter-clockwise, but first wiggle the shower head and see how stable the pipe coming out of the wall is, it should be connecter to a board in the wall that will hold it steady.
    Miker9587's Avatar
    Miker9587 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 9, 2007, 09:50 PM
    You do not need the water shut off to the apartment as long as the part you need to replace is above the valves that turn off your water to the shower... Also you are going to need a joint to connect the two pipes...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rain shower head & handheld shower head problem [ 4 Answers ]

I have a shower with 2 pipes for showers heads (one on the wall in front, and one on a side wall). The wall in front has a rain shower head on it. The wall to the side has a hand held shower head attached. The pipe with the hand held shower attached has a push button valve to turn the handheld on...

Replace shower Plumbing Valve assembly shower head 2 knobs [ 3 Answers ]

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...

Hot water in the shower until shower head installed [ 6 Answers ]

I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?

Shower Pipe Drips When Shower Head is Removed [ 4 Answers ]

Hi, I keep buying new hand held showers heads that leak from the hose. I buy Delta brand. After I installed a new one yesterday, it started leaking from the hose again. Today I took off the entire shower head and see that from the pipe that comes out from the wall, it drips water at a pretty...

Best way to install fixed shower head and personal shower [ 4 Answers ]

I am installing a new shower setup. I want to install a fixed shower head as well as a hand held personal shower with hose. On the Kohler website they sell a diverter valve with some sort of backflow valve for this purpose. I have a friend who just had this done and he has no diverter valve just...


View more questions Search